![[Laser cut and engrave] Keychain Display](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1b557ab9-e34d-4dcd-9c15-7ca9668ab7bb?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Keychain Display](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Keychain Display](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1b557ab9-e34d-4dcd-9c15-7ca9668ab7bb?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Keychain Display](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b65852dd-f68e-4fc4-9c05-63ab4f6932e6/20240601_153305.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Keychain Display](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/fb8da196-ec16-4461-82cd-61fde704bbf1/20240601_153310.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Keychain Display
Instruction
Information
With the upcoming release of the new F1 Ultra, I needed a way to showcase my new keychains, so I created this keychain display.
If you need something larger, please check out this link https://www.designfind.com/howtos/14177
62/312
Instruction
Step1: Design 1
The first step was making the hook for the keychains. For this, I used a lot of small pieces to create the hook. Then, I took a ? and used the edit node function to isolate just the hook piece. After that, I used the combine function to assemble the entire keychain hook.
Step2: Design 2
After making the hook, I created a board to hold the keychains. I made multiple holes for the hooks to fit and then created 12 sets of hooks and the stand for the keychain display.
Step3: Material
For this project, I used basswood as it is easy to cut. Other materials such as acrylic would also work, but it really depends on what fits your store.
Step4: Laser time
For this project, I utilized a 40-watt S1 laser. Remember to adjust the settings to match your machine and always wear your safety glasses.
Step5: Assembly
Now it's time to glue the base to the display. This is really easy, just make sure to hold it there for a while.
Step6: You're Done
Now you're done with your display. Good job!
