Report
![[Laser cut and engrave] 4" Pallet Coaster - 3mm Basswood](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/65908d8e-b730-4b7f-8aa2-aae7edccbe3c?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] 4" Pallet Coaster - 3mm Basswood](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
4" Pallet Coaster - 3mm Basswood
InstructionPallet Coaster 4 inch - 3mm
.xcs
Application scenario
Laser (6min)
Machine & module
xTool P2
55WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
324
2249
Instruction
1
Step1: Position cut file
These words may be changed and or deleted.
2
Step2: Adjust Power, Speed, and cut/engrave settings
RED = CUT POWER 100 - SPEED 20 - PASS 1
BLACK = CUT POWER 100 - SPEED 18 - PASS 1
BLUE= ENGRAVE POWER 20 - SPEED 150 - PASS 1 - LPCM 120
3
Step3: Cut and Assemble
After cutting, position the three wide boards parallel to each other.
Take the three middle supports and carefully snap them into the previously placed boards.
Now attach the two thin faceplates onto the exposed sides.
All that is left is to snap the six top boards.
It is a snug fit, so be careful while assembling.
Comments
