Report
![[Laser cut and engrave] Schmuck Geschenkdose](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b598bd99-5ce0-4ee2-9665-282321d7436d?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Schmuck Geschenkdose](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Schmuck Geschenkdose](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b598bd99-5ce0-4ee2-9665-282321d7436d?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Schmuck Geschenkdose](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1b8a9342-82bf-4491-98d4-6f94184aa178/IMG_3852.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Schmuck Geschenkdose
Geschenkdose Schmuck
.xcs
Application scenario
Laser
Machine & module
xTool S1
20WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
23
519
Information
You need a total of four parts and wood glue.
Two times the heart, once with engraving (lid) and once without engraving (box).
Then once the small heart with a hole, which becomes the "can" and once the cut-out thin heart for the lid.
Two parts are glued together.
One is the heart with engraving and the thin heart for the lid and the heart without engraving and the smaller heart with hole for the box.
Comments
