Slate Coaster – “Life Begins After Coffee”

📐 Specifications:

Material: Natural slate stone

Size: 10 × 10 cm (±2 mm)

Thickness: ~5 mm

Shape: Square with rough natural edges

Design: Centered text “Life Begins After Coffee” in stylish font

Finish: White/grey permanent engraving

🛠️ Tools & Materials:

xTool S1 (20W)

Slate coaster blank (natural, uncoated)

Masking tape (optional, for edge protection)

Damp cloth for cleaning

🧰 Laser Settings (for slate engraving):

Power: 60–70%

Speed: 100–120 mm/s

Line Density: 254–318 LPI

Air Assist: ON (low)

Tip: Slate engraves best when surface is clean and free of dust/oils.

🧾 Step-by-Step Instructions:

Prepare the coaster

Wipe the slate with a damp cloth to remove dust.

Optionally tape the edges to prevent soot marks.

Design the text layout

Center “Life Begins After Coffee” in your design software.

Choose a bold, legible font for maximum contrast.

Size the text to fit within ~8 cm for even margins.

Place coaster in laser bed

Align in the top-left corner or use a jig for repeat runs.

Autofocus for best engraving depth.

Engrave

Run the engraving pass at recommended settings.

Inspect and repeat pass if you want deeper contrast.

Clean and finish

Wipe with a damp cloth to remove dust.

Optionally apply a food-safe stone sealant for a darker, richer look.

💡 Use Cases:

Coffee shop tableware

Gifts for coffee lovers

Home kitchen décor

Event giveaways

Rustic café branding

🔗 More Projects

🌐 Website: https://www.gklwooddesign.cz
📷 Instagram: https://www.instagram.com/gkl_wooddesign