Report

Valentines Day Card - Be My Valentine

Instruction

bemyvalentinecard

.xcs

Application scenario

Blade cut、Inkjet printing

Machine & module

xTool M1 Ultra

20W

Material used

cardstock

1316

Information

      Use your M1 Ultra to create a cute valentines card.

Preview

Decide what you want your card to be
- Bring in some images or add some text to your design.
Create a box 6" x 5"
Create another box 3"x 5" and align the box to the right side of the 6"x5" box
- shown in the 2nd photo (Red box)
Make sure you design is inside the red box. This is going to be the front side of the card.
Once you have it all aligned delete the red box, this was just to help you place your design.

Preview

First set up your sticky mat and cardstock in your laser
Set up your blade in the blade slot
Change the processing type to inkjet printer
After it prints you want to change the processing type to blade
Make sure all your settings are correct
- I am using a 176g cardstock in this project and found 80 power / 80 speed / 2 passes worked for me. If you are using a lighter or thicker cardstock you will need to adjust your settings.