Titanic Laser-Cut Model — Build the legend, piece by piece

Hello! You can reach out to atomm's official customer support for assistance.

Hello! Sorry for the delayed reply. Yes, an assembly manual is included!

The files include AI, DXF, SVG, and XCS formats.

For the 3mm thickness version, the final size is 1297mm × 339mm × 134mm. For the 2mm thickness version, the final size is 864mm × 226mm × 86mm. (Length × Height × Width)

You will be able to get it after the crowdfunding period ends.

Hello, I strongly advise you not to use a laser machine like the F2 Ultra UV. This type of machine is not designed to perform real cutting work. This model requires a large amount of cutting, so it is best to use a dedicated laser cutting machine with the right power and work surface.

Hello, please do not reduce the file size directly in the software, as this will change the dimensions of the parts and may prevent the correct cutting as well as assembly of the model. The files are available in two versions depending on the thickness of the material: 3 mm and 2 mm. If the working surface of your machine is less than 300 × 300 mm, you should use the version designed for 2 mm thick plates. With this version, the overall size of the model will be slightly reduced, and each cutting plate will measure around 200 × 266 mm.