Money Gift Box with Motif

Give money gifts a personal touch: this generator creates a card from three layers of wood. The motif and text are cut into the cover, the banknote sits in the spacer frame in between, and binding screws hold it together. You can switch the spacer off for a simple two-layer card. All sizes are real millimetres, and the file is ready for xTool Studio straight away.

How it works

1. Pick a template: Choose from 26 occasions on the left, for example wedding, new baby, birthday, graduation, Christmas, Easter, retirement or thank you. Each template sets a matching motif, font, card size and greeting. You can change everything afterwards.
2. Edit the text:Type your own message (up to 120 characters) and choose a font. With stencil fonts, no parts of the letters fall out. For scripts without a stencil font, such as Chinese, Japanese, Korean, Thai or Cyrillic, the text is engraved instead.
3. Set motif and layout:Choose the motif, its position and its size. Motif and text can each be cut out or engraved. The check panel warns you before details become too small or thin.
4. Set the size: Enter width, height and corner radius, in mm or inches. The screw holes follow the corner radius automatically. Choose a binding screw size (4, 5 or 6 mm shaft) or enter your own.
5. Choose the layers:Add a back panel with optional engraving, for example names and a date. The spacer frame leaves room for folded notes or coins. It is open at the top so the note slides in, with a finger notch for easy removal.
6. Look at the result: Switch between wood view, cut lines and 3D. The 3D view shows the stacked card with screws and the note inside; drag to turn it. Pick a material on the surface card to preview wood or acrylic. This changes the preview only, never the file.
7. Check before cutting:The check panel shows whether every part is safe to cut, meaning no loose pieces and no webs that are too thin.
8. Export: Use “Export” to download or open directly in xTool Studio. Cut lines and engravings are recognised automatically.
   • Download gives you a ZIP with the complete file and one SVG per layer.
   • Open in Studio opens one editable file with all layers.

The interface follows your Atomm language and is available in all 17 platform languages.

Materials

• 3 mm plywood, for example basswood or birch
• 4 binding screws with a 5 mm shaft; shaft length at least 8 mm for two layers, at least 10 mm with the spacer

Tip: Do a test cut of one panel first. If the screws are too tight, choose a slightly larger hole diameter under “Screws”, for example 5.4 mm.