Pink To Silver Stainless Steel Tumbler with Handle(40oz)
Laser engraved stainless steel tumber. These setting worked great for a tumbler purchased from the Dollar Tree.
MachineF2(Blue light · 15W)
Processing ModeUse rotary attachment
Processing typeEngrave
Thickness3mm
Material colorPurple
SettingsPass1
Speed35mm/s
Power35%
Spacing200°
DPI500DPI
Dot duration100s
Engraving modeBi-directional
Engraving methodScanning
Laser typeBlue light
Cross hatchfalse°
Outline tracingfalse
angleTypeIncremental°
Dwell time0.3s
Pass1
Speed35mm/s
Power35%
Spacing200°
DPI500DPI
Dot duration100s
Engraving modeBi-directional
Engraving methodScanning
Laser typeBlue light
Cross hatchfalse°
Outline tracingfalse
angleTypeIncremental°
Dwell time0.3s
Version: 1.6.8
Parameter ConverterLimited-time Free
Convert to My Machine Parameters4
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.