Brass
ID m-9274
30MM brass artillery shell. Setting based off of 40w diode laser.
MachineS1(Blue light · 40W)
Processing ModeUse rotary attachment
Processing typeEngrave
SettingsVersion: 1.9.11
How to apply settings in Studio/XCS
0
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.
Similar Materials
Brass
Machines
F1 UltraF2 UltraF2F2 Ultra(Single)F2 Ultra UVX1M2D1S1D1 ProD1 Pro 2.0F1P3
Tested Settings149
xTool-tested
2mm
Brass
MachinesF2 Ultra(Single) (Fiber IR 60W)
ModeUse rotary attachment
TypeEngrave
1
3mm
Brass
MachinesF1 Ultra (Fiber IR 20W)
ModeProcess on flat surface
TypeEngrave
2
Brass
MachinesF2 Ultra (Fiber IR 60W)
ModeProcess on flat surface
TypeEngrave
1
Brass
MachinesF2 (Fiber IR 5W)
ModeProcess on baseplate
TypeEngrave
18
Brass
MachinesF2 Ultra (Fiber IR 60W)
ModeProcess on flat surface
TypeEngrave
3
1mm
Laiton
MachinesF1 Ultra (Fiber IR 20W)
ModeProcess on flat surface
TypeCut
8
1mm
Brass metal casing
MachinesF2 (Fiber IR 5W)
ModeProcess on baseplate
TypeEngrave
11
Brass
MachinesF2 Ultra (Fiber IR 60W)
ModeProcess on flat surface
TypeScore
4
Brass
MachinesF2 Ultra (Fiber IR 60W)
ModeProcess on flat surface
TypeEngrave
14
0.7mm
Glossy Brass
MachinesM2 (Fiber IR 3W)
ModeLasering on flat surface
TypeEngrave
0
Glossy Brass
MachinesF1 Ultra (Blue light 20W)
ModeLASER_CYLINDER_CATCH
TypeEngrave
3
4mm
Brass coin
MachinesF2 Ultra (Fiber IR 60W)
ModeProcess on flat surface
TypeEngrave
3
Brass coin
MachinesF1 Ultra (Fiber IR 20W)
ModeEmbossment
TypeEmboss
132
2mm
polished brass metal keychain
MachinesF2 Ultra (Fiber IR 60W)
ModeProcess on flat surface
TypeEngrave
0
gold brass metal casing
MachinesF2 Ultra (Fiber IR 60W)
ModeProcess on flat surface
TypeEngrave
1
gold brass metal coin
MachinesF2 (Fiber IR 5W)
ModeProcess on baseplate
TypeColor Engrave
0
4mm
gold brass metal tag
MachinesF2 (Fiber IR 5W)
ModeProcess on baseplate
TypeEngrave
12
4mm
Brass Coin Blank
MachinesF1 Ultra (Fiber IR 20W)
ModeEmbossment
TypeEmboss
0
Black Coated Brass
MachinesF2 (Fiber IR 5W)
ModeProcess on baseplate
TypeEngrave
0