r.thompson.ryt
r.thompson.ryt

MDF

ID m-9102
M1 Ultra 20w Engraving processed on 3mm plain MDF no prepping.  Picture was processed in xtool using auto adjust only, no invert.
MachineM1 Ultra(Blue light · 20W)
Processing ModeProcess on baseplate
Processing typeEngrave
Thickness3mm
Material colorBrown
Brand/SupplierAmazon/Acrux7
Settings
Version: 2.0.0

How to apply settings in Studio/XCS

0
Precautions
Wear goggles that match the wavelength of the light sourceWear goggles that match the wavelength of the light source
When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Before cutting, make sure the fire extinguishing equipment is in placeBefore cutting, make sure the fire extinguishing equipment is in place
Before starting cutting, place the CO2 fire extinguisher or blanket within one meter of the equipment in a location that is easily accessible. Combustible materials such as wood and acrylic carry the risk of ignition.
Flammable materials should be placed near the smoke exhaust outletFlammable materials should be placed near the smoke exhaust outlet
Flammable materials such as wood, paper, and fabrics should be placed near the exhaust outlet, so that sparks and smoke generated during processing can be promptly removed, reducing the risk of ignition.
Handling when a flame alarm appearsHandling when a flame alarm appears
If a flame alarm is triggered when processing flammable materials such as plywood, acrylic, or polyester mesh: stop processing immediately, maintain smoke exhaust operation, and only open the lid after confirming there is no open flame. Do not open the lid directly to promote ignition.
Prevent high-temperature burns after processingPrevent high-temperature burns after processing
Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
🔔 Processing Tips
Turn on air assist to improve the incision
Turning on Air-Compress Assist blows away slag and dust, suppresses flames, resulting in cleaner cuts and fewer scorched edges; It also reduces smoke during carving.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.

Similar Materials

Sublimation MDF
3mm

Sublimation MDF

Machines
M2
Tested Settings1
badge-iconxTool-tested
Sublimation MDF Fridge Magnet

Sublimation MDF Fridge Magnet

Machines
M2
Tested Settings1
badge-iconxTool-tested
Round Sublimation MDF Keychain
3mm

Round Sublimation MDF Keychain

Machines
M2
Tested Settings1
badge-iconxTool-tested
Rectangular Sublimation MDF Keychain
3mm

Rectangular Sublimation MDF Keychain

Machines
M2
Tested Settings1
badge-iconxTool-tested
1/2"(12mm) MDF
12mm

1/2"(12mm) MDF

Machines
F1 UltraF1 LiteF2 Ultra UVX1M2D1S1D1 ProD1 Pro 2.0F1M1P2M1 UltraP2S
Tested Settings122
badge-iconxTool-tested
1/4"(6mm) MDF
6mm

1/4"(6mm) MDF

Machines
F1 UltraF1 LiteF2 Ultra UVX1M2D1S1D1 ProD1 Pro 2.0F1M1P2M1 UltraP2S
Tested Settings143
badge-iconxTool-tested
MDF
3mm

MDF

MachinesM2 (Blue light 20W)
ModeLasering on flat surface
TypeCut
tbaugerud
tbaugerud
1
MDF
6.25mm

MDF

MachinesM2 (Blue light 10W)
ModeLasering on flat surface
TypeEngrave
Kaofranckao
Kaofranckao
0
mdf
3mm

mdf

MachinesM2 (Blue light 10W)
ModeLasering on flat surface
TypeEngrave
efrain713
efrain713
3
mdf

mdf

MachinesM2 (Blue light 20W)
ModeLasering on flat surface
TypeEngrave
Stationerypoint
Stationerypoint
0
mdf
3mm

mdf

MachinesM1 (Blue light 10W)
ModeProcess on baseplate
TypeEngrave
carpaolino69
carpaolino69
11
Mdf
4mm

Mdf

MachinesM2 (Blue light 20W)
ModeLasering on flat surface
TypeCut
enishadzisehic232
enishadzisehic232
7
Mdf
4mm

Mdf

MachinesM2 (Blue light 20W)
ModeLasering on flat surface
TypeCut
enishadzisehic232
enishadzisehic232
3
MDF
3mm

MDF

MachinesM1 Ultra (Blue light 20W)
ModeLasering on flat surface
TypeCut
Wine & Whiskers
Wine & Whiskers
9
MDF
3mm

MDF

MachinesD1 Pro (Blue light 5W)
ModeProcess on flat surface
TypeCut
mela.creativelab
mela.creativelab
0
MDF
3mm

MDF

MachinesM1 (Blue light 10W)
ModeProcess on baseplate
TypeCut
sarahbohr
sarahbohr
1
mdf
3mm

mdf

MachinesM2
ModeLasering on flat surface
TypeCut
gomessousavitor
gomessousavitor
5
MDF
3.4mm

MDF

MachinesS1 (Blue light 40W)
ModeProcess on baseplate
TypeScore
369 Design
369 Design
3
MDF
3mm

MDF

MachinesM1 (Blue light 10W)
ModeProcess on baseplate
TypeEngrave
sarahbohr
sarahbohr
3
mdf
3mm

mdf

MachinesM2 (Blue light 20W)
ModeLasering on flat surface
TypeCut
Stationerypoint
Stationerypoint
2