Round Rock Coaster
Slate Coaster (10cm), Xtool F1 Ultra, Blue Light, 2x passes, Finished with Rustoleum Clear Flat Matte Spray Sealer
MachineF1 Ultra(Blue light · 20W)
Processing ModeProcess on baseplate
Processing typeEngrave
Thickness4.5mm
Material colorGray
Brand/SupplierMarket Square (Hobby Lobby)
SettingsPass1
Speed80mm/s
Power85%
DPI350DPI
Dot duration300s
Bitmap modeStucki
Engraving modeBi-directional
Engraving methodDotting
Laser typeBlue light
Frequency30kHz
Pass1
Speed80mm/s
Power85%
DPI350DPI
Dot duration300s
Bitmap modeStucki
Engraving modeBi-directional
Engraving methodDotting
Laser typeBlue light
Frequency30kHz
Version: 2.0.0
0
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
🔔 Processing Tips
Performed second pass, which enhanced contrast.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.