mrkkinsella

Glass

Fun little project with the S1 to make this cool sign

MachineS1(Blue light · 20W)

Processing ModeProcess on baseplate

Processing typeEngrave

Thickness3mm

Brand/SupplierLocal Glass shop

Settings

Version: 2.0.0

Precautions

Wear goggles that match the wavelength of the light source

When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;

Prevent high-temperature burns after processing

Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.

🔔 Processing Tips

Clean the surface before marking

Wipe off surface oil stains and fingerprints with alcohol to prevent marking smudges and uneven finish.

Before engraving inside the glass, the refractive index must be confirmed

The depth of the inner engraving is affected by the material's refractive index, which varies depending on the glass/crystal. Before processing, measure according to the instructions or select the corresponding material; otherwise, the focal point will be off.

Did these settings work?No results yet

No one has shared a result yet. Be the first to let other makers know if these settings worked.

Glass

Similar Materials