Round Soda-Lime Glass Cup 9.8oz (290ml)

Sharing the settings that produced this bright, detailed skull engraving on soda-lime whisky glass using the xTool F2 Ultra Dual, processed flat.

Settings:

* Process: Engrave
* Laser: Blue Light Diode
* Power: 70%
* Speed: 150 mm/s
* Passes: 1
* Lines per cm: 140
* Engraving mode: Uni-directional
* Defocus: Off
* Engraving angle: 0° incremental
* Cross hatch: On

Defocus +2mm upwards

Different glass types and coatings may react differently, so use these settings as a starting point and run a small test first.