adhdwinnwr

Brown to Silver Laserable PU Leather

x tool s1 20w

MachineS1(Blue light · 20W)

Processing ModeProcess on baseplate

Processing typeEngrave

Thickness0.5mm

Material colorBrown

Brand/Supplierx tool

Settings

Version: 2.0.0

Precautions

Wear goggles that match the wavelength of the light source

When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;

Processing chlorine-containing materials is prohibited

It is strictly forbidden to process chlorine-containing materials such as PVC, artificial leather, or veneer soft rubber. Laser burning releases highly corrosive toxic gases such as hydrogen chloride, endangering human health and corroding guide rails, lenses, and circuit boards. When unsure about the material, first conduct a small-area test and observe the smell.

Pay attention to odor prevention during processing

Materials such as leather, rubber, and silicone produce noticeable odors; ensure good ventilation and wear protective masks if necessary.

Prevent high-temperature burns after processing

Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.

🔔 Processing Tips

Material flatness inspection

Plywood and MDF are prone to warping when damp, and metal materials are prone to deformation under force. Before machining, check whether the surface is flat, and if necessary, flatten or replace the material; otherwise, the focus may shift and cause incomplete cutting and uneven engraving depth.

Tips for using the metal deep engraving mode

Deep engraving requires multiple layered processing, with attention to slag removal and heat dissipation layer by layer to avoid one-time high-power explosions and slag slag damage.

Turn on air assist to improve the incision

Turning on Air-Compress Assist blows away slag and dust, suppresses flames, resulting in cleaner cuts and fewer scorched edges; It also reduces smoke during carving.

Did these settings work?No results yet

No one has shared a result yet. Be the first to let other makers know if these settings worked.

Brown to Silver Laserable PU Leather

Similar Materials