Stu's Shed
Stu's Shed

Square Rock Coaster

The material is a 100mm square rock drink coaster. Machine is a S1 20W
I sanded the stone until it was flat and smooth
I applied three different paints to the stone, white, red and then black
MachineS1(Blue light · 20W)
Processing ModeProcess on baseplate
Processing typeEngrave
Thickness5mm
Material colorBlack
Settings
Pass1
Speed80mm/s
Power40%
Spacing100°
Bitmap modeJarvis
Engraving modeBi-directional
Laser typeBlue light
Version: 2.0.0
Parameter ConverterLimited-time Free
Convert to My Machine Parameters
0
Precautions
Wear goggles that match the wavelength of the light sourceWear goggles that match the wavelength of the light source
When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingPrevent high-temperature burns after processing
Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.