Rock coaster
J'ai pré vernis avec un gloss avant de graver
MachineS1(Blue light · 20W)
Processing ModeProcess on baseplate
Processing typeEngrave
Material colorBlack
SettingsPass1
Speed500mm/s
Power70%
Spacing246°
Bitmap modeGrayscale
Engraving modeBi-directional
Laser typeBlue light
Pass1
Speed500mm/s
Power70%
Spacing246°
Bitmap modeGrayscale
Engraving modeBi-directional
Laser typeBlue light
Version: 2.0.0
Parameter ConverterLimited-time Free
Convert to My Machine Parameters0
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.