K5 Crystal Keychain
MachineF2 Ultra UV(Ultraviolet light · 5W)
Processing ModeInner Engraving
Processing type3D Inner Engraving
Thickness10mm
SettingsPass1
Speed80mm/s
Power80%
Dot duration150s
Frequency60kHz
Layer Height0.04mm
Engraving MethodDotting
refractive_index1.5
Pass1
Speed80mm/s
Power80%
Dot duration150s
Frequency60kHz
Layer Height0.04mm
Engraving MethodDotting
refractive_index1.5
Version: 2.0.0
9
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.