Square Rock Coaster
Clean Slate coaster with isopropyl alcohol to remove dust or debri, let dry, then spray 1 coat white chalk paint let dry for at least 30 minutes the spray one coat of flat black paint and let dry, upload image and invert image, turn on ir preheat and engrave
MachineF2(Fiber IR · 5W)
Processing ModeProcess on baseplate
Processing typeEngrave
Thickness5mm
Material colorBlack
SettingsPass1
Speed80mm/s
Power100%
DPI350DPI
Dot duration225s
Bitmap modeJarvis
Engraving modeBi-directional
Engraving methodDotting
Laser typeIR
Pass1
Speed80mm/s
Power100%
DPI350DPI
Dot duration225s
Bitmap modeJarvis
Engraving modeBi-directional
Engraving methodDotting
Laser typeIR
Parameter ConverterLimited-time Free
Convert to My Machine Parameters2
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.