natural cork wood coaster
estaba buscando este color oscuro para que hiciera contraste con el corcho y quedo perfecto, para este tipo de material 30% esta excelente
MachineM2(Blue light · 10W)
Processing ModeProcess on baseplate
Processing typeEngrave
Thickness5mm
SettingsPass1
Speed80mm/s
Power30%
Spacing100°
Dot duration10s
Engraving modeBi-directional
Engraving methodScanning
Laser typeBlue light
Airflow of air pump15%
Min Output Power3%
Cross hatchfalse°
Power control modeFOLLOW_ACTUALLY_POWER
Outline tracingfalse
Pass1
Speed80mm/s
Power30%
Spacing100°
Dot duration10s
Engraving modeBi-directional
Engraving methodScanning
Laser typeBlue light
Airflow of air pump15%
Min Output Power3%
Cross hatchfalse°
Power control modeFOLLOW_ACTUALLY_POWER
Outline tracingfalse
Version: 2.0.0
Parameter ConverterLimited-time Free
Convert to My Machine Parameters2
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Flammable materials should be placed near the smoke exhaust outletFlammable materials such as wood, paper, and fabrics should be placed near the exhaust outlet, so that sparks and smoke generated during processing can be promptly removed, reducing the risk of ignition.
Pay attention to odor prevention during processingMaterials such as leather, rubber, and silicone produce noticeable odors; ensure good ventilation and wear protective masks if necessary.
Handling when a flame alarm appearsIf a flame alarm is triggered when processing flammable materials such as plywood, acrylic, or polyester mesh: stop processing immediately, maintain smoke exhaust operation, and only open the lid after confirming there is no open flame. Do not open the lid directly to promote ignition.
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.