Round Rock Coaster
New additions to the USA 250th collection
MachineF2 Ultra(Blue light · 60W)
Processing ModeProcess on baseplate
Processing typeEngrave
Thickness4.5mm
Material colorBlack
SettingsPass2
Speed80mm/s
Power70%
DPI300DPI
Dot duration100s
Bitmap modeJarvis
Engraving modeBi-directional
Engraving methodDotting
Laser typeBlue light
Frequency65kHz
Pulse width200s
Pass2
Speed80mm/s
Power70%
DPI300DPI
Dot duration100s
Bitmap modeJarvis
Engraving modeBi-directional
Engraving methodDotting
Laser typeBlue light
Frequency65kHz
Pulse width200s
Version: 2.0.0
Parameter ConverterLimited-time Free
Convert to My Machine Parameters33
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?1 makers tried these settings
+1
1worked
0didn't work