1.8mm Stainless Steel Silver Bone Dog Tag
MachineF2 Ultra UV(Ultraviolet light · 5W)
Processing ModeProcess on baseplate
Processing typeEngrave
Thickness1mm
SettingsPass1
Speed15000mm/s
Power10%
Spacing200°
DPI500DPI
Dot duration100s
Engraving modeBi-directional
Engraving methodScanning
Frequency40kHz
Cross hatchfalse°
Outline tracingfalse
angleTypeIncremental°
delayPerLine0.3s
Pass1
Speed15000mm/s
Power10%
Spacing200°
DPI500DPI
Dot duration100s
Engraving modeBi-directional
Engraving methodScanning
Frequency40kHz
Cross hatchfalse°
Outline tracingfalse
angleTypeIncremental°
delayPerLine0.3s
Version: 2.0.0
Parameter ConverterLimited-time Free
Convert to My Machine Parameters1
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?1 makers tried these settings
+1
1worked
0didn't work