Coated Canvas (White+Black)
Leinwand weiß schwarz bemalt Xtool S1
MachineS1(Blue light · 20W)
Processing ModeProcess on baseplate
Processing typeEngrave
Thickness20mm
SettingsPass1
Speed180mm/s
Power30%
Spacing100°
Bitmap modeJarvis
Engraving modeBi-directional
Laser typeBlue light
Pass1
Speed180mm/s
Power30%
Spacing100°
Bitmap modeJarvis
Engraving modeBi-directional
Laser typeBlue light
Parameter ConverterLimited-time Free
Convert to My Machine Parameters0
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Before cutting, make sure the fire extinguishing equipment is in placeBefore starting cutting, place the CO2 fire extinguisher or blanket within one meter of the equipment in a location that is easily accessible. Combustible materials such as wood and acrylic carry the risk of ignition.
Flammable materials should be placed near the smoke exhaust outletFlammable materials such as wood, paper, and fabrics should be placed near the exhaust outlet, so that sparks and smoke generated during processing can be promptly removed, reducing the risk of ignition.
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?2 makers tried these settings
+2
2worked
0didn't work