![[Laser cut and engrave] Essential Oils Diffuser Tray](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4b7120ed-be41-49c2-af50-58d4fa42f581?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Essential Oils Diffuser Tray](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Essential Oils Diffuser Tray](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4b7120ed-be41-49c2-af50-58d4fa42f581?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Essential Oils Diffuser Tray](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a38c01a3-61e7-46ed-bd81-aa0901effb03/20240517_181554.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Essential Oils Diffuser Tray](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/14f669db-37c9-49da-8f25-6f1e3aad867c/20240517_181607.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Essential Oils Diffuser Tray
Instruction
Information
Many enjoy an essential oils diffuser, but with the diffuser, and various oils, it might be a little bit of clutter to keep all the items together. This small tray may help keep everything together and organize.
Instruction
Étape1: Gather measurements
You may need to modify this project for your own diffuser. Mine is 5 inches in diameter, so we will use this for the inside measurement of the first compartment of our tray. I also figured that a 2 inch compartment would be sufficient to store accessories and bottles of oil.
Étape2: Design the Box
Let's start at the boxes.py site to use the tray template
Boxes - DividerTray (boringplace.org)
In the image i have listed the settings, but you may need to adjust for your application.
Étape3: Layout
On this project, I have set up the parts of the box on two canvases. I am doing this because the material I have is 12x12 inches. Keep this in mind as you set up for your material and laser.
Remember to not adjust the size of the box once it is in XCS as this may cause the finger joints to not fit.
Étape4: Settings
All operations on this project are cut operations. The settings are for the D1 5W laser. You may need to adjust the settings for your laser configuration.
Be sure to follow all the safety guidelines for your laser and always wear personal protective equipment when the laser is in operation.
