![[Laser cut and engrave] Black Laser Engraved Custom Business Card with Contact Details](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/afe9578b-f89d-4c17-a87d-35c58942ffb3.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Black Laser Engraved Custom Business Card with Contact Details](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/afe9578b-f89d-4c17-a87d-35c58942ffb3.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Black Laser Engraved Custom Business Card with Contact Details](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a5006667-e38d-4b14-a858-4c83dbb51651.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)



xToolのクリエイティブスペースで「.xcs」ファイルを開きます。
名刺が入っているキャンバスは一枚だけです。
異なる素材を使う場合は、設定を適切に更新してください。
例えば、合板と二色のプラスチックシートを使ってテストを行いました。もしそうするなら、カットアウトの輪郭も有効化する必要があるかもしれません。
すべてのカスタマイズ可能なコンテンツは「グリーン」コンテンツレイヤーにあります。ご自身のニーズに合わせて調整してください。
素材を機械に入れて彫刻を始めてください。
名刺を一括処理する場合は、XCSのバッチ処理が選択肢かもしれませんし、合板のジグを使うと作業が速くなります。
カードを楽しんでね。:)