신고
![[Laser cut and engrave] Xtool Grid](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Ff0cfeaae-31e7-482c-9dab-10609efbb745%2FIMG_5021.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Xtool Grid](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Xtool Grid](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Ff0cfeaae-31e7-482c-9dab-10609efbb745%2FIMG_5021.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Xtool Grid](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Fedc94af2-b167-40b7-a70b-e9821c5fcb6d%2FIMG_5021.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Xtool Grid
지침
Grid_File
.xcs
응용 시나리오
레이저 (15min)
기계 및 모듈
xTool D1 Pro
10W사용된 재료
1/2" Plywood
Birch Plywood
1/2" Birch Plywood
418
3712
지침
1
단계1: Material needs
I purchased a 24" x 24" piece of sanded birch plywood from my local hardware store and a set of Xtool laser retaining feet from an online marketplace. Next I installed the retainer legs onto the plywood and put my Xtool in the feet.
2
단계2: Setup
Pull up the file and enter the listed settings
3
단계3
Hit the Process button and click on center for the starting parameter. Run the file.
댓글
