Report

[Laser cut and engrave] Pumpkin Coasters — Project made with xTool D1 Pro machine for Laser cut and engrave.

Pumpkin Coasters

Remix

Instruction

halloween coaster

.xcs

Show 1 more

Application scenario

Laser (20min)

Machine & module

xTool D1 Pro

20W

Material used

Paint

Wood

3mm Basswood Plywood

2237

Information

      A deviation from this file from Xtool https://projects.xtool.com/inspiration/2470. Not as a batch file but a little different look to the coasters

This remix is based on

The original work has been deleted or is no longer accessible.

Instruction

Step1: Design Stage 1

Preview

This project was changed from the xtool project by using the different shaped pumpkins, they were then changed to have a different look on them. A Happy Thanksgiving was added to each coaster. A shape was added from the shape list of ferns.

Step2: Design Stage 2

Preview

In this step a copy of the ferns was made and was reversed with the use of the reflect button, they then were lined up to each other from the ends and were united using the combine feature. These new ferns were placed just under the thanksgiving of each coaster and were set to be scored.

Step3: Settings and Laser Machine

Preview

This step was to adjust the settings and send the file to laser machine, once the file and machine were complete the coasters were done all because the wood used was pre-painted and dried before hand.

Comments