Devil Dog Wall Clock

ID 156325

Instrução

Arquivos

Arquivos originais

AutorS1 · 3/16"(4.5mm) Birch Plywood, Clock Works

Adicionar Perfil de Fabricação

Mesmo design, máquina, material ou qualquer melhoria diferente · Ganhe 100 Créditos

Dicas para criar um ótimo Perfil de Fabricação →

637

Informação

      Once a Marine Always a Marine.  This clock shows the pride of those that served, this could be a family member or a loved one.  Makes a great Gift.

Instrução

Etapa1: First Cutouts & First Painting

Devil Dog Wall Clock instruction: step 1 - First Cutouts & First Painting

Pré-visualização

First note is that your setting may change based on the machine and material
Cutout the Clock Back and the Clock Face
Using the Alignment tabs glue the Clock Face to the Clock Back
Alignment is to ensure the clock works are square to the clock
After the Clock Back and Clock Face is dry Stain the Inner Ring

Etapa2: Second Cutouts and Painting

Devil Dog Wall Clock instruction: step 2 - Second Cutouts and Painting

Pré-visualização

Before the second Engraving and Cutout, Paint the Inner Ring
Once the Cutouts are done, Paint the Outer Ring Black
Save the Inner Ring for a spacer, Use to Align the Outer Ring
Once Outer Ring is dry, Glue to Clock Face, Again the spacer helps in Alignment

Etapa3: Final Assembly Steps

Devil Dog Wall Clock instruction: step 3 - Final Assembly Steps

Pré-visualização

Glue the Inner Ring to the Clock Face
Glue the Bulldog to the Clock Face, Ensure the clock works holes are aligned
Add the clock works
Thread Length needs to be (Clock Face + Design + Nut space)
Note: Clock Works can be found on Amazon (Ensure sizes are correct for the wood used)

Have Fun…

Comentários