jeanluc.dombrun

Report

[Laser cut and engrave] Tableau décoratif laser cut poissons koi et fleurs sur fond bleu — Project made with S1 machine for Laser cut and engrave.

Decorative painting laser cut koi fish and flowers on blue background

Instruction

Untitled_recovered.xcs

Untitled_recovered

.xcs

Application scenario

Laser processing (15min)

Machine & module

xTool S1

20W

Compatible xTool Machine

M1

Material used

Matte Self-adhesive Vinyl

gift

6

748

Information

      Glass, adhesive masking vinyl, gold foil and acrylic paint, and voila, a beautiful painting.

Wall decoration

Instruction

1

Step1: prepare the glass, clean and dry.

2

Step2: Apply masking to the whole thing cleanly by eliminating as many bubbles as possible

3

Step3: position the glass on a raised frame of the grid (simply sacrifice a frame that will serve as a support

4

Step4: Be careful, fix this support well, because it will serve as a guide for the second step

5

Step5: lower the glass in it (or put it on your guides)

6

Step6: focus and CUT power 15 speed 30

7

Step7: Remove the glass without moving your support (the glass will have to return to the same place)

8

Step8: Now, remove the parts of the contour that will be golden, delicately, with a scalpel

9

Step9: This done, after drying (depending on gilding (in this case add a layer of varnish) or gold paint)

10

Step10: To clearly delimit and facilitate the removal of the fine parts for the rest, the glass must be placed back in its support

11

Step11: redo a cut with the same parameters

12

Step12: All you have to do is paint all the parts, carefully removing each piece

13

Step13: At the end of the course, when all the parts are removed (one by one and painted) apply a coat of black acrylic

Decorative painting laser cut koi fish and flowers on blue background instruction: step 13 - At the end of the course, when all the parts are removed (one by one and painted) apply a coat of black acrylic

Preview

Decorative painting laser cut koi fish and flowers on blue background instruction: step 13 - At the end of the course, when all the parts are removed (one by one and painted) apply a coat of black acrylic

Preview

Decorative painting laser cut koi fish and flowers on blue background instruction: step 13 - At the end of the course, when all the parts are removed (one by one and painted) apply a coat of black acrylic

Preview

8 More images

Cutting the mask is quick and easy, the bulk of the project is in the painting for a grandiose effect. Don't forget the second cutting pass, otherwise you will have difficulty removing the elements.

Comments

Remixes

License

You may also like