報告
![[Laser cut and engrave] Handcrafted leather wallet for stylish and practical men](https://storage-us.atomm.com/resource/xart/result/352680/4299011d-dd24-4453-98d1-a208f7dcccac.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Basic Leather Wallet
指示
PocketSections
.xcs
2件をさらに表示
アプリケーションシナリオ
Laser processing (45min)
機械とモジュール
xTool F1
2W, 10Wアクセサリ
xTool F1 Slide Extension
使用される材料
2-3 oz Leather
125
1124
情報
These files will make a leather wallet with 2 card pockets and slot for cash.
You will need 2-3 oz leather (1-1.5mm thick), and some thread.
You will also need the slide extension if you are using the F1.
指示
1
ステップ1: Select your leather
I recommend a 2-3 oz leather, otherwise you will end up with a very thick wallet.
If you are using a F1, you will need a veg-tan Leather since the F1 can not cut through chrome tans.
If you are using a P2 you should be able to select and cut any 2-3 oz leather.
2
ステップ2: Attaching the pockets
First thing you will have to do is stitch the shortest row of stitch holes on the pockets to your inside sections. Make sure to do both sides.
3
ステップ3: Stitch Time
Now using a saddle stitch, just start at one end of the L shaped stitch holes and work your way around.
Do this to both sides.
Once you have done both side you are done.
If you want to get real fancy, you can bevel, and burnish your edges.
Enjoy!
コメント
