Mi primera Navidad

To make this design we just have to follow these simple steps: 

• We will make a 90 mm circle and create its inner contour at -8. 
• Select both circles and click on combine subtract in superposition. 
• Create a star and create its outline at 6, to round its tips. We adapt its size to that of the inner circle. We select both shapes and click on combine and join. 
• We create a small rectangle (for the top of the ball) and create its outline in 2 (to make it rounded), we place it on the top of the ball and click on combine and join. 
• We create a 12 mm circle and a 20 mm circle, We select both shapes and click on combine and subtract in superimposition. We place it on top of the previous shape and select both shapes and hit combine and join. 
• We insert a foot, make a copy, and in the copy we click on reflect horizontally, we place them apart. We insert a heart and create its inner contour at -2. Select the feet and the big heart and click on combine and join. 
• Finally we add the texts "My first Christmas" and "2024", we choose the font we like the most. We adapt its size and shape to the inner shape of the hoop. 

Select the shape to cut and the texts to engrave. We check the parameters. 

We turn on our Xtool, insert the material we are going to work with and hit it to process. 

We let the machine do its work but always supervise it closely. 

Once we have our pieces, we are going to put a little glue on the back of the feet and stick it on the ball in the place we like the most. 

To finish it I used burlap tape, cut a piece, put it through the hole and glued both ends with the silicone gun. On top I glued a small burlap bow to decorate. 

We have our beautiful special ball ready for the babies who will experience this as their first Christmas.