LaserCutano

Nahlásit

[Laser cut and engrave] Multi-layer Flashlight — Project made with xTool S1 machine for Laser cut and engrave.

Multi-layer Flashlight

Návod

Flashlight5

.xcs

Aplikační scénář

Laser processing (30min)

Stroj a modul

xTool S1

20W

Kompatibilní · 13

Použitý materiál

1/8"(3mm) Basswood Plywood

1373

Informace

      Elevate your home decor with this beautiful decorative lantern silhouette! Featuring an exquisite laser-cut design, this piece brings sophistication and charm to any space. Although it doesn’t hold a candle, its detailed ornamentation and silhouette-style pattern make it a captivating wall or shelf decoration.

Key Features:
9-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Scalable to your desired size.
Perfect for both beginners and experienced makers.

Download this design and start creating your own enchanted Lantern!

Návod

Krok1: Using xTool Creative Space

Multi-layer Flashlight instruction: step 1 - Using xTool Creative Space

Náhled

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

BLACK LAYER

Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
Select the black layer (this layer contains the path for cutting).
Set the processing type of the black layer to Cut.
Click on “EasySet panel” to open the power and speed settings for the selected layer.
Set the Power (S1-20w: 100)
Set Speed (S1-20w: 5)
Set Number of Passes (S1-20w: 1)