Nahlásit
![[Laser cut and engrave] Easter deco Happy Easter wooden bunny and egg decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/60c4a496-e0d6-48a7-8182-4c3f03246a53?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Easter deco Happy Easter wooden bunny and egg decoration](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Easter deco Happy Easter wooden bunny and egg decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/60c4a496-e0d6-48a7-8182-4c3f03246a53?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Easter deco Happy Easter wooden bunny and egg decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/46953e76-ce8e-44de-b4c6-c043133e0a0b.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Easter deco with base
Návod
bunnyegg
.xcs
Aplikační scénář
Laser processing
Stroj a modul
xTool M1
10WKompatibilní · 13
Použitý materiál
1/8"(3mm) Basswood Plywood
257
1267
Návod
1
Krok1: XCS
Náhled
red is cut
black is engrave
i made the cut-out part of the base with a kerf of -0.15
this can vary from device to device
2
Krok2: assemble
Náhled
you can put everything together and it holds
if the kerf did not fit you can also glue it
the back onto the front and then both onto the base
Komentáře
