Creatac

Report

[Laser cut and engrave] Boucles d'oreilles pendantes en forme de corail — Project made with xTool S1 machine for Laser cut and engrave.

Natural Coral Earrings - Bohemian Engraved Wood – Navy Elegance

Instruction

corail

.xs

Application scenario

Laser processing

Machine & module

xTool S1

20W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

178

Information

      Bring a touch of escape to your outfit with these delicate engraved wooden coral earrings. Handmade in my workshop, they combine the natural warmth of wood with a pattern finely inspired by marine arabesques and bohemian style.

Light and pleasant to wear, they will accompany a summer outfit as well as a dressier look. Each pair is carefully cut and engraved to reveal the elegant details of these iconic creatures of the oceans.

They will be even prettier by engraving both sides, follow the procedure

Instruction

Step1: Download the file

Téléchargez le fichier XCF sur votre ordinateur.

Step2: Open in xTool Studio

Lance xTool Studio et importe le fichier XCF.

Step3: Launch xTool Studio and import the XCF file.

Adjust your material, power and speed according to your machine and the type of wood.
(Always do a little test first!).

Adjust the settings to suit your machine and material.
The included settings are optimized for an xTool S1 20W using 3mm basswood

Make sure to set the correct material height (focus).

Frames the work area and moves the design as needed.

Step4: Start the laser

Place your material, frame the design, and then start cutting/engraving. Happy gaming! ✨

Step5: Flipping the loops

Preview

To engrave the second side, fix the plate securely, retrieve the Seahorses without moving the plate and turn them over, place them each in the other location.

Just restart the engraving by ignoring the cutting