Report

[Laser cut and engrave] Pink Floral Easter Egg Hanging Ornament — Project made with xTool S1 machine for Laser cut and engrave.

Pink Floral Hanging Ornament

Remix

Instruction

Lampe Blomster

.xcs

Show 2 more

Application scenario

Laser processing

Machine & module

xTool S1

40W

Compatible xTool Machine

10W, 20W

M1 Ultra

10W, 20W

Material used

A4 Color Cardboard - Pink

526

Information

      A lamp/ ornament made out of cardboard. The pieces are cut using my S1,40W and afterwards put together very easily. I have made the lamp in both 300gsm and 270 gsm cardboard. I recommend to add a layer of thin silk paper at the back to make the lamp light better and the cardboard even more sturdy.

This remix is based on

Easter Bunny Egg Lantern

xiong

Instruction

Step1

I did some changes to the original file: I removed the bunny ears to make the lamp also relevant outside the easter season. I removed the easter pattern and replaced with flower shapes found in xtool library.

I split the file into sections that fit the paper size (A4). I needed 3 papers for cutting all the elements.

I put the frame together first (the large open rounds), then the upper and lower support circles. Finally the 6 flower sections were put into the slots.

I use battery led light inside.

Comments