
canv
ID m-54
MachineS1(Blue light · 10W)
Processing ModeProcess on baseplate
Processing typeEngrave
SettingsPass1
Speed1000mm/s
Power70%
Spacing200
DPI500DPI
Dot duration100s
Engraving directionBi-directional
Laser typeBlue light
Pass1
Speed1000mm/s
Power70%
Spacing200
DPI500DPI
Dot duration100s
Engraving directionBi-directional
Laser typeBlue light
How to apply settings in Studio/XCS
14
Precautions
When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Before cutting, make sure the fire extinguishing equipment is in placeBefore starting cutting, place the CO2 fire extinguisher or blanket within one meter of the equipment in a location that is easily accessible. Combustible materials such as wood and acrylic carry the risk of ignition.
Flammable materials should be placed near the smoke exhaust outletFlammable materials such as wood, paper, and fabrics should be placed near the exhaust outlet, so that sparks and smoke generated during processing can be promptly removed, reducing the risk of ignition.
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.
Similar Materials

Cotton Canvas
Machines
C1
C1+1
Tested Settings6

White Canvas Tote Bag
Machines
F2 Ultra UVX1M2
F2 Ultra UVX1M2+3
Tested Settings7

Black Canvas Tote Bag
Machines
F2 Ultra UVM2
F2 Ultra UVM2+2
Tested Settings6

Coated Canvas (White+Black)
Machines
F1 UltraF1 LiteM2D1S1D1 ProD1 Pro 2.0F1M1P2M1 Ultra
F1 UltraF1 LiteM2D1S1D1 ProD1 Pro 2.0F1M1P2M1 Ultra+11
Tested Settings111

Canvas
MachinesM2 (PRINTER)
ModeInkjet printing
TypeInkjet printing
0

3.8mm
Canvas
MachinesM2 (Blue light 20W)
ModeLasering on flat surface
TypeEngrave
3

woven cotton canvas fabric
MachinesM2 (PRINTER)
ModeInkjet printing
TypeInkjet printing
1

Needlepoint Canvas
MachinesM2 (PRINTER)
ModeInkjet printing
TypeInkjet printing
0

Needlepoint Canvas
MachinesM2 (PRINTER)
ModeInkjet printing
TypeInkjet printing
0

Needlepoint Canvas
MachinesM2 (PRINTER)
ModeInkjet printing
TypeInkjet printing
0

Needpoint Canvas
MachinesM2 (PRINTER)
ModeInkjet printing
TypeInkjet printing
0

Painted Canvas
MachinesM1 Ultra (Blue light 20W)
ModeLasering on flat surface
TypeEngrave
3

Coated Canvas (White+Yellow+Orange+Black)
Machines
F1 UltraF1 LiteM2D1S1D1 ProD1 Pro 2.0F1M1P2M1 Ultra
F1 UltraF1 LiteM2D1S1D1 ProD1 Pro 2.0F1M1P2M1 Ultra+11
Tested Settings111

Coated Canvas (White+Yellow+Red+Black)
Machines
F1 UltraF1 LiteM2D1S1D1 ProD1 Pro 2.0F1M1P2M1 Ultra
F1 UltraF1 LiteM2D1S1D1 ProD1 Pro 2.0F1M1P2M1 Ultra+11
Tested Settings111