1/64"(0.2mm) Frosted Black Coated Aluminum Alloy

ME001-02

0.2mm

F2 Ultra UV

F2 Ultra

F2 Ultra (Single)

P2S

M1 Ultra

F1 Ultra

F1 Lite

D1 Pro

D1 Pro 2.0

Laser Power

Processing Mode

Process on baseplate

Processing Type

Engrave

Visualizza i dettagli dei parametri in Studio/XCS

Tempo di aggiornamento dei parametri: 2026-07-17

Selezionato

makeblock-xtool

Risultati professionali · Configurazione immediata · 30 giorni senza rischi

Tutti i dettagli

Non disponibile

Opzione 1

Frosted Black

Black

Multicolor

Blue

Opzione 2

300pcs

Quantità

Precauzioni per l'elaborazione

Clean the material after processing

During processing, this material may generate dust or other substances that remain on the surface. To improve appearance and functionality, clean off carbon residue, slag, or oxide layers using water, alcohol, ultrasonic cleaning, or specialized cleaners.

Use odor protection during processing

Processing materials may release strong odors or fumes. A proper ventilation and exhaust system is required to protect the operator's health and reduce the impact of smoke on processing quality.

Prevent oxidation before and after cutting

This material uses laser-induced oxidation on the surface to achieve black, white, or other color effects. However, in high temperature, high humidity, or when wiped with acidic/alkaline substances, the colors may fade or disappear. In such cases, an oxidation protection paste or spray should be applied to preserve the effect.

Be careful of burns from high heat after processing

This material accumulates heat during processing, making the surface very hot. Let it cool down for a while after processing to avoid burns.

Stay close to the exhaust vent

When processing this material (e.g., with F-series devices), place it near the exhaust fan after proper focusing. This helps with smoke removal, cooling, and camera positioning.