Report

Leatherette Patch Jig

Instruction

Leatherettejig.3x2xcs

.xcs

Application scenario

Laser processing

Machine & module

xTool S1

20W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/4"(6mm) Walnut Plywood

351

3631

Information

      Designed a jig for leatherette 3x2 in. patches. Will fit hexagon, oval, and rectangle patches. There is an overlay for all 3 types of patches for laser area.

Instruction

Step1

Preview

Place your 12x24 in. panel in the S1, make sure the right side is snug against the wall while being carful not to have it on top of the lip, line up corners shown with the black screws. I lined it up with the side of the screw closest to me when S1 was open.

Step2

Go to XCS. Frame to make sure its in your area that you want it. Then process.

Step3

Preview

Once complete make note where you lined up your corners if you didn't follow the 1st step or had to move the panel for some reason.

Step4

Preview

Now you can use the jig! Back on the XCS go to your laser settings and change the output to off. Select all items and lock into place. The shapes are color coded and can be used to get a rough estimate of work area on the patch.