First you will need to set your RA2 pro like the picture here. If you have the riser base you need to put your honeycomb at the B symbol. The ornament will be in this position. Load this design to practice https://www.creativefabrica.com/product/have-a-holly-jolly-christmas-svg-design-11/ref/165358/ .

You have to choose the SVG type to have clean engraving. Make sure the image you choose you have to click reflect vertically so the image is in the right way to be engraved. Make sure you chose LASER CYLINDRICAL to engrave with the RA2 pro. Set the parameters settings that are here and the size you'll want and is all set. The time that takes depends on the design. Here is a video where I show how I made mine.