HomeTemplatesTools & Special MaterialsTest Grid
cmedina7692
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

Xtool Grid

Instruction
Grid_File.xcs
Grid_File
.xcs
Application scenario
Laser (15min)
Machine & module
xTool D1 Pro
10W
Material used
1/2" Plywood
Birch Plywood
1/2" Birch Plywood
394
3011
Information
      A grid for lining up materials on your laser
Instruction
1
Step1: Material needs

I purchased a 24" x 24" piece of sanded birch plywood from my local hardware store and a set of Xtool laser retaining feet from an online marketplace. Next I installed the retainer legs onto the plywood and put my Xtool in the feet.

2
Step2: Setup

Pull up the file and enter the listed settings

3
Step3

 

Hit the Process button and click on center  for the starting parameter. Run the file.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro