Report
![[Laser cut and engrave] Customized Rainbow Watch Straps](https://image-res.xtool.com/ali-res/community/making/baa9ad7c-3d01-49f4-9cea-5c8b3896442d/20230726-143819.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Customized Rainbow Watch Straps
InstructionRainbow watch band
.xcs
Application scenario
Laser
Machine & module
xTool P2
Material used
Silicone
1/8"(3mm) Basswood Plywood
417
8658
Information
Today, we are going to share an incredibly trending project that has been making waves recently - the customized rainbow watch straps that match perfectly with your Apple Watch! Try it out to add a colorful touch to your wristwear!
Instruction
1
Step1
Preview
Start by importing the design file into XCS software, and select Slates Flat mode.
Click auto-measure, and manually ass 3-5mm to the measured result. Next, click Start to frame the engraving range. When completed, start engraving.
2
Step2
Preview
Preview
Wipe the dust off the strap, and dry with a paper towel.
For more details, please see this video tutorial: https://youtu.be/70a-VhVgbUc
NOTE
As the auto-measured distance is a bit smaller, the laser head may come into contact with the metal button on the watch strap protrusion, which could cause the strap to shift. To ensure proper functioning, it is recommended to manually increase the focusing distance by 3-5mm.
Comments