1. Install the laser module to your M1 Ultra and turn M1 Ultra on.
2. Connect M1 Ultra to your computer using the provided USB cable. Then, open the xTool Creative Space (XCS) software and connect M1 Ultra to XCS.
3. Download the coaster project file according to the power of your laser module, and open the file in XCS.

1. Place the coaster on the baseplate of M1 Ultra.
2. On the right panel, click Mark, select the Polygon marking mode, and then click Start marking.
3. Manually move the laser module to make the red-cross spot fall at a vertex of the processing area as illustrated, and press the point marking button on M1 Ultra to record the position. Repeat the steps to record other vertices.
4. Click End marking and Done to exit marking. You can see the marked processing area on the canvas.

1. Move the laser module to ensure that the red-cross spot falls on the surface of the coaster. Close the lid of M1 Ultra.
2. On the right panel of XCS, click the icon next to the Distance(mm) parameter. M1 Ultra automatically measures the distance from the top of the laser module to the upper surface of the coaster.

1. Move the text and pattern to the processing area on XCS.
2. (Optional) Click the text to select it and then double-click to edit.

1. Click Process. The Preview page is displayed, showing the estimated time and processing module.
2. Click Start. After Ready appears on XCS, press the Start/Stop button on M1 Ultra.

Wait for the laser engraving process to complete. Then take out the coaster.

NOTE

Do not pause the process or move the coaster during laser engraving. Otherwise, the position of the text and pattern will deviate on the coaster.