stephcreated

Report

[Laser cut and engrave] Paint Selection Chart — Project made with xTool M1 machine for Laser cut and engrave.

Paint Selection Chart

Instruction

PaintChart

.xcs

Application scenario

Laser (60min)

Machine & module

xTool M1

10W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

1559

Information

      Do you have a lot of paint pens for your small business and always doing test pieces before painting? Here is a simple solution I made for my paint pen collection.

30creatorschallenge

paint

small business

Instruction

Step1: The Design

Preview

2 More images

Start off by creating 12" x 12" square because I know this is my work space I want to work with.
- This square is just a guid for all the other objects and will be deleted later
Add your text at the top
Add a small square and click Grid Array
- Adjust the rows and columns by how many you will need as well as the spacing
  - For this design I did 60 squares for 60 paint pens
Next I add the number “1” and placed it centered over the first square
- Again back into Grid Array and adjust to the rows, columns and spacing
Ungroup the number 1's when you are done
Now you will need to go individually to each number 1 and relabel them (2,3,4,etc)
once you have everything how you like and how many boxes you need you can delete the outer box
set your engrave settings for the numbers and title
- the boxes can be set to score
- if you want this to be a fast projects set your numbers to score as well

Step2: Paint & Label

Preview

Next you will need to paint inside your boxes and label your paint pens with corresponding stickers with numbers.
I keep my chart next to my paint pens and keep them in the same order on my paint pen holder to make it easier for grabing and painting

Comments