Segnala
![[Laser cut and engrave] Shepherd](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/217d7da2-d5e8-4739-88a6-4bc7693b9403?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Shepherd](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Shepherd](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/217d7da2-d5e8-4739-88a6-4bc7693b9403?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Shepherd](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d90f8d2f-bb26-4376-81b8-8fbad1b76aed/shepherd01 (1).jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Shepherd](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/af5e9454-c2ec-469b-85c5-e94a57b06a1a/shepherd1B&W.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Shepherd](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/31f919a3-2751-41bc-99e4-6ae98bd8e739/shepherd01 (2).jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Shepherd
Istruzione
Shepherd1
.xcs
Scenario di applicazione
Laser (15min)
Macchina e modulo
xTool M1
10WMateriale utilizzato
3mm Basswood Plywood A4
63
1871
Istruzione
1
Passo1: Open the Shepherd1.xcs file
Anteprima
- Open the Shepherd1.xcs file on xtool creative space
2
Passo2: Use the triangular prism
Anteprima
- Use the triangular prisms, place the wood on the prisms.
3
Passo3: Connect the machine and adjust the file to fit into the material
Anteprima
3. Connect the machine and adjust the file to the size of the material. The smallest you can laser cut for this file is about 7cm in diameter.
4
Passo4: Power on the machine and wait
Anteprima
4. Send the file to “process”, press “start”, and click on the machine to start.
Commenti
