举报
![[Laser cut and engrave] Clip board](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/91136f5d-5dae-48c1-8347-e2c91180b352?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Clip board](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Clip board](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/91136f5d-5dae-48c1-8347-e2c91180b352?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Clip board](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1fab735b-dcfe-42c5-af5d-f7f959d1fd95/IMG_7300.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Clip board
教程
clipboard art
.xcs
应用场景
激光 (45min)
机器与模块
xTool P2
55W兼容的 · 13
使用的材料
1/8"(3mm) Basswood Plywood
15
659
教程
1
步骤1: Placement
预览
You will need a larger piece of wood for this design. All element/layers are scored apart from the outline which is cut.
Adjust your settings and place the design where you want it cut on the wood. Then press process.
2
步骤2: Painting
I used POSCA pens to colour in the designs, leave until dry.
3
步骤3: Clips
Using two bulldog clips glue to the desired place on your clip board and once these are dry it is ready to use.
评论
