Reindeer Christmas display stand

This design consists out of 4 panels. The front panel is the shape of the reindeer holding up the ‘Merry Christmas’ sign. The other 3 panels hook into the front and one in the back-end, forming a square shape. (I  have not made a bottom in this project, but feel free to do so if it fits your needs.)
The openings on the two side panels both are slightly diagonal so that the front panel leans slightly backwards, providing extra stability.

The front panel:

• Start off by placing the 40 x 30 cm 8mm thick MDF Board on the honeycomb panel in your machine.
• Measure the distance and line up the laser with the design and woodpanel.
• Let the machine run the engraving, scoring and cutting process.
  Double check if the cutting went fully through and if the engraving provided the desired result. If the result is too light (for the engraving) or the wood isn't lose yet (cutting) then go for another pass until the desired result is reached.

The sides and back panels:

• On the other canvas you find the 3 other panels. Follow the same steps for these as for the front panel.

Adjustments:

If desired the project can be adjusted. For example the text can easily be altered and the font is an easy adjustment as well.

If you want a more severe change, for example changing the reindeer into something else and you struggle doing so, feel free to reach out, I gladly help.

Good luck and have fun!
 

Kind regards,

Nicole
Sow-It