The Second Half

Processing Mode: Print

Import The Second Half base PNG into your C1 design software and position the artwork to fit the 8 × 10-inch canvas board.

Check the artwork placement and print settings before starting.

Print the landscape directly onto the canvas board using the inkjet module.

Tip: Pay particular attention to the placement of the artwork so the main landscape features remain visible and the four taped corners can be finished afterward (or left blank).

Once printing is complete, allow the canvas board to rest for a few minutes so the ink can dry before handling it.

Carefully remove the painter's tape once the surface is ready to handle.

Avoid touching or rubbing the freshly printed artwork.

To finish the areas previously covered by painter's tape, apply paint (e.g., white, black, or gold), or decorative gold foiling by hand to the four corners of the canvas.

Optional: Paint and/or Gold foiling is not required. You may leave the four corners of the canvas blank for a simpler, rugged finish.

Install the fine-point blade on the xTool C1.

Import your layered cutting accent designs (e.g., helmet plates, accent plates, etc) and prepare the individual pieces.

Cut the layers using a combination of:

Heavyweight solid-color cardstock

Colored foil cardstock

Select cutting settings appropriate for each material and perform a small test cut when needed.

Carefully remove the pieces from the mat, taking extra care.

Examine the finished artwork to make sure all accent pieces are securely attached and all adhesives have fully dried.

Your The Second Half mixed-media puzzle art canvas is complete!

Enjoy! Craft on.

Rail Against The Norm®