Glass Holiday Ornament

This is a glass holiday ornament.  Note:  shatterproof ornaments will not work.  You can use a jig to hold the ornament in place or attach to a rotary tool.  i used the F1 - Fiber IR 2W for this project.  The same setting apply to the F2.  Autofocus the ornament then manually de-focus by 1-2mm.  If the coating has not removed for a single pass run it again.

MachineF1(Fiber IR · 2W)

Processing ModeProcess on baseplate

Processing typeEngrave

Thickness2mm

Material colorPurple

Settings

Pass1

Speed1000mm/s

Power100%

Spacing300°

Dot duration10s

Engraving modeBi-directional

Engraving methodScanning

Laser typeIR

Pass1

Speed1000mm/s

Power100%

Spacing300°

Dot duration10s

Engraving modeBi-directional

Engraving methodScanning

Laser typeIR

Parameter ConverterLimited-time Free

Convert to My Machine Parameters

Try it