STEVIER

Pine Wood

This is my first real project with my new P2S Laser...it's an amazing laser...and highly recommended for ease of use...!!!  This is a log plaque that will appear in photos on our group 'Family September Weekend Holiday' just outside Aberdeen in Scotland.  This took about an hour and 45 minutes...but I wanted multiple passes to ensure no scorching of the wood.  Overall Im really pleased with the output...and will be adding a coat or two of matt clear coat spray for protection.

MachineP2S(Carbon Dioxide Laser · 55W)

Processing ModeProcess on baseplate

Processing typeEngrave

Thickness21mm

Material colorBrown

Brand/SupplierLocal seller

Settings

Version: 2.0.0

Precautions

Personnel must be present throughout the processing process to supervise the process

During laser processing, someone must be stationed near the equipment; it is strictly forbidden to leave the machine. Materials can suddenly ignite under high energy density, and flames often take only a few seconds from appearance to spread. Without anyone present, power cannot be cut off immediately to extinguish the fire, potentially causing equipment to burn or even catch fire.

Starting the process only after turning on the smoke exhaust purification device

Before processing, first turn on the smoke exhaust or air purifier and confirm that the pipeline is not bent or blocked. The smoke and dust generated by laser processing contain harmful particles and irritating gases, and long-term inhalation can damage the respiratory tract; Smoke accumulation can also contaminate lenses and attenuate the optical path, affecting processing quality.

Wear goggles that match the wavelength of the light source

When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;

Before cutting, make sure the fire extinguishing equipment is in place

Before starting cutting, place the CO2 fire extinguisher or blanket within one meter of the equipment in a location that is easily accessible. Combustible materials such as wood and acrylic carry the risk of ignition.

Flammable materials should be placed near the smoke exhaust outlet

Flammable materials such as wood, paper, and fabrics should be placed near the exhaust outlet, so that sparks and smoke generated during processing can be promptly removed, reducing the risk of ignition.

Handling when a flame alarm appears

If a flame alarm is triggered when processing flammable materials such as plywood, acrylic, or polyester mesh: stop processing immediately, maintain smoke exhaust operation, and only open the lid after confirming there is no open flame. Do not open the lid directly to promote ignition.

Prevent high-temperature burns after processing

Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.

🔔 Processing Tips

Multiple lower power passes to reduce scorch marks

Turn on air assist to improve the incision

Turning on Air-Compress Assist blows away slag and dust, suppresses flames, resulting in cleaner cuts and fewer scorched edges; It also reduces smoke during carving.

Seal wood when complete with matt clear coat spray

Did these settings work?No results yet

No one has shared a result yet. Be the first to let other makers know if these settings worked.