Plain Surface Laser Inkjet PET Self-Adhesive-4.1oz(140g)

AD011-01

Vinyl

Laser Power

10W

Processing Mode

Lasering on flat surface

Processing Type

Cut

View parameter details in Studio/XCS

Parameter Update Time: 2026-09-10

Selected

makeblock-xtool

Pro Results · Instant Setup · Risk-Free 30 Days

Out of Stock

Quantity

Processing precautions

Wear goggles that match the wavelength of the light source

When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;

After processing is complete, wait until the smoke is cleared before opening the lid to retrieve the part

After processing, do not open the lid immediately. Wait for the smoke exhaust system to run for 10~30 seconds and after the smoke inside the chamber is completely removed before removing the part. Opening the lid immediately will allow unvented smoke or odorous gases to flow directly into the operator's face. Ensure good ventilation and wear a protective mask if necessary.

Check material processing guides

For Wood, Metal, Acrylic, etc. and precautions during the processing

Similar Materials

Inkjet PET Self-Adhesive-4.1oz(140g)