5/64"(2mm) 304 Stainless Steel Sheet

ME005-07(ME047)

2mm

F2 Ultra UV

F2 Ultra

F2 Ultra (Single)

F1 Ultra

F1 Lite

D1 Pro

D1 Pro 2.0

View parameter details in Studio/XCS

Parameter Update Time: 2026-01-08

Processing precautions

Highly reflective material

This material is highly reflective to lasers and may reflect the beam, potentially damaging the laser device. Applying anti-reflective treatment (e.g., black marking spray) to the surface can reduce reflections.

Use odor protection during processing

Processing materials may release strong odors or fumes. A proper ventilation and exhaust system is required to protect the operator's health and reduce the impact of smoke on processing quality.

Prevent oxidation before and after cutting

This material uses laser-induced oxidation on the surface to achieve black, white, or other color effects. However, in high temperature, high humidity, or when wiped with acidic/alkaline substances, the colors may fade or disappear. In such cases, an oxidation protection paste or spray should be applied to preserve the effect.

Be careful of burns from high heat after processing

This material accumulates heat during processing, making the surface very hot. Let it cool down for a while after processing to avoid burns.

Stay close to the exhaust vent

When processing this material (e.g., with F-series devices), place it near the exhaust fan after proper focusing. This helps with smoke removal, cooling, and camera positioning.